Tanks Accessories

⇒ ⇒ ⇒ International Orders Welcome! Serving over 145 Countries and counting ⇐ ⇐ ⇐

Slow Speed Mixer…

click to enlarge images

Slow Speed Mixer for Wax Melting Tanks

A Low Speed Mixer is the perfect tool for candle makers. You get continuous, gentle, and thorough mixing of your colors and fragrances. Very high torque at slow speeds. Our maintenance free Slow Speed Mixer mounts easily onto your jacketed tank.

Description:

  • Food grade polypropylene Impeller Blades are 3" (7.62") wide and angled at 30 degrees.
  • Designed with a Double Blade System so it does not mix air into your candle wax or other products. Excellent for blending in fragrances and colors hands free.
  • Food & cosmetic grade Stainless Steel on all fittings including the shaft.
  • All parts including the motor channel mount are food & cosmetic grade materials.
  • This is a Very lightweight unit that you can easily mount and lift the whole assembly out of your tank.
  • The Shaft is milled 6" (15cm) in length at the center point to allow for up and down blade adjustment.
  • Geared for excellent torque and power. Thick slurries are not a problem for this amazing mixer. Note: To ensure the blades can turn freely without jamming, make sure at least some of your wax has been liquefied.
  • For full access to the tank, the Lid can easily be removed. The Lid is hinged on one side (not shown) so its easy to take a peek or add ingredients. The opposite side of the lid slips over the motor channel mount.
  • Temperature is rated to 230 F (210C) on all parts.
  • Aside from cleaning, there is Zero maintenance required.
  • If you have special requirements or any questions about which Slow Speed Mixer best suits your needs, please feel free to contact us.  We have special motor speeds up to 250 rpm.

Specifications:

  • The heavy duty motor is designed for continuous duty. 120 Volt.  Note: International or Domestic customers with 220 Volt requirements, just let us know when you place your order, we can install a 220 volt motor at no additional charge.
  • Motor is fully enclosed for moisture resistance.
  • Cord is chemical and oil resistant and 8' (2.4m) in length.
  • Can ship UPS.
Model # Description Price
OHM1-13 Single Blade Slow Speed Mixer for 13 gallon Tank $1,034.00
OHM2-20 Single Blade Slow Speed Mixer for 20 Gallon Tank $1,158.00
OHM2-45 Double Blade Slow Speed Mixer for 45 Gallon Tank $1,291.40
OHM2-60 Double Blade Slow Speed Mixer for 60 Gallon Tank $1,394.10
OHM2-85 Double Blade Slow Speed Mixer for 85 Gallon Tank $1,654.10
OHM2-125 Double Blade Slow Speed Mixer for 125 Gallon Tank $1,889.10

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

International Orders are Welcome!  Serving over 145 Countries and counting

Tank Jackets…

tank-jacket
click to enlarge

 

International Orders are Welcome.

Serving over 145 Countries and counting...

Wax Melter Tank Insulation Jacket

Cover your Wax Melter Tank with an insulation jacket to drastically lower energy usage.  Your wax melter tank heats faster and your waxes or other materials will stay heated longer.

Description:

Our Tank Insulation Jacket is made with durable and efficient high R-value material. Its comprised of a heat resistant inner foam core that's lined inside and out with highly reflective heavy foil. Covering your wax melting tank with an insulation jacket is an easy and effective method to conserve heat and energy that saves you money.

Tank Insulation Jacket kit includes: pre-cut top, bottom and side panel. Plenty of heavy duty, reflective foil tape is also included with the kit.

Instructions are simple to follow and it only takes about 10 minutes to have your jacket fitted, taped and ready to go. The only tool required for installing is either a sharp knife or box cutter.

Wax, water, oils or heat do not affect the insulation value.

Specifications:

Constructed out of High R value ¼” (7mm), Foam Core insulation lined with Double Sided Foil.

Heavy duty foil tape is included.

Can ship UPS.

 

Model # Description Price
6MHJ 6 gallon Insulating Tank Jacket $31.00
13MHJ 13 gallon Insulating Tank Jacket $33.00
20MHJ 20 gallon Insulating Tank Jacket $40.00
45MHJ 45 gallon Insulating Tank Jacket $47.00
60MHJ 60 gallon Insulating Tank Jacket $60.00
85MHJ 85 gallon Insulating Tank Jacket $67.00
125MHJ 125 gallon Insulating Tank Jacket $99.75

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

International Orders are Welcome

Serving over 145 Countries and counting...

click to enlarge

Ball Valve Reducer for 1.5 inch Ball Valve

Do you require more precise control when filling smaller candle molds? Use our Ball Valve reducer to reduce the size of flow. Its easy to connect right onto the Large 1.5 " Ball Valve your wax melting tank comes supplied with.

Description:

  • You can save considerable time when using this reducer. Instead of pouring your wax into a smaller vessel before filling your candle mold, now you can dispense directly from the wax melter tank.
  • Reduces flow down to 3/8" (10mm) by connecting directly onto the 1.5" (38mm) Ball Valve.  You then use the Reducer for turning flow on and off.
  • A lot less messy and much more efficient method for filling your candle molds.

Specifications:

  • Reduces from the 1.5" (38mm) Ball Valve to a smaller 1/2" (13mm) Ball Valve with 3/8" (10mm) flow.
  • Fully assembled and Ready to install! You do not need pipe cement or Teflon tape when attaching to the 1.5" Ball Valve.
  • Suitable for temperatures up to 220 F (104 C).
  • Withstands most acids and alkalis.

finger

Instructions to use Ball Valve Reducer:

  • 1st step - Ensure the reducer valve is in closed position before installing.
  • Thread the reducer into the large ball valve. Its only necessary to be hand tight. Its easy to remove too.
  • Plastic to plastic makes a superior seal without the need for Teflon tape. It does not need to be extremely tight.
  • Open the large 1.5" ball valve and then dispense with the small ball valve on the reducer.
  • When you are finished dispensing, Close the Big Valve and unscrew the reducer to remove.
  • Really simple to clean - Run a twisted up piece of rag or dowel rod through the opened ball valve in the reducer to clean most of your product out and then just wash and you're ready to run your next batch.

 

Model # Description Price
15BVred Reducer for 1.5 inch Ball Valve $53.43

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

ball-valve-heater
click to enlarge

HANDcraft™ Ball Valve Heater

Never have the flow in your ball valve blocked again with hardened wax.  Simply attach our HANDcraft™ Ball Valve Band Heater, turn it on and warm to melt that wax.

45W 120V band heater includes adjustable Velcro straps and fits around both 3/4" or 1" Metal Ball Valves.

Note: Not intended to use on Plastic Ball Valves

 

Model # Description Price
BVHEAT HANDcraft™ Ball Valve Band Heater $205.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

click to enlarge

HANDcraft™ Heated Valve Assembly

If you've ever had the flow in your Ball Valve blocked with hardened wax, you know what a headache that can be. This Heated Valve Assembly solves that problem and is perfect for candle makers that that require continual heat from the tank to your candle molds.

  • Fits on all of our Wax Melting Tanks.
  • Comes pre-assembled and ready to install.
  • Heated Valve Assembly is easy to remove and replace with the standard 3 way Ball Valve on your tank for different operations.
  • Just plug it in and you're ready to fill your molds.
  • Includes:  1 ½” Stainless Steel Reducer Bell Coupling w/ ¾” Brass Ball Valve and 90 degree brass elbow, Foam Insulation for the Stainless Steel Bell Coupling, and HANDcraft™ Ball Valve Heater.
Model # Description Price
BVHeatAssem HANDcraft™ Heated Valve Assembly $268.50

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

We Welcome International Orders!

Serving over 145 Countries and counting...

click to enlarge

HANDcraft™ Brass Ball Valve

3/4" Brass Ball Valve

Model # Description Price
34BV HANDcraft™ Brass Ball Valve 3/4" $18.50

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

1.5 Inch Replacement Ball Valve

Control flow with this 3-way polypropylene Ball Valve. It operates like a valve faucet and only takes a quick 1/4 turn to shut off all flow from your tank. This 3-way  ball valve can flow either horizontally or vertically. Impervious to potassium or sodium hydroxide. Comes set-up for 90 degree downward dispensing. 

Note:  This specific valve allows your waxes to flow quickly from a horizontal path to a vertical path which allows you to pour directly into your candle molds. We can have a reduction fitting if you need to reduce the flow for small cavity molds. See our Ball Valve Reducer. For any questions, please Contact us.

 

Model # Description Price
15BV 1.5 " Ball Valve Replacement $62.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Faucet for Tank Jacket Inlet or Outlet Drain

This handy faucet can replace the inlet or drain plug on your jacketed wax melter. Control the flow just by turning a handle. The faucet also makes it possible to attach a standard garden hose to easily fill or drain your tank jacket. 

Added convenience. Perfect for flushing water from the tank jacket to cool the contents down.

  • All Brass Faucet fits the ½” tank inlet and drain outlet.
  • Replace your Drain Plug for a much faster method of emptying of your tank jacket. Way less messy too 🙂
  • Possible to connect tubing or a garden hose.

Specifications

  • ½” Brass Hose Bib Fitting with a ¾” threaded garden hose connection

 

Model # Description Price
OHdrain Faucet for Tank Jacket (Faucet Only) $14.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

International Orders are Welcome!!

Serving over 145 Countries and counting...

click image to enlarge

Wax Melter Tank Scale

Increase your efficiency levels dramatically by eliminating the task of weighing a pail of ingredients at a time to pour into your tank.  Just zero the scale before filling your wax melting tank with your raw materials.

Description:

  • Weight range: up to 1000 lbs. (454 kg).
  • High end accuracy: 0.02% or 0.2 lbs (90 g) at 1000 lbs. (454 kg).
  • Heavy duty Tank Scale is encased in a corrosion resistant Stainless Steel enclosure.
  • Weigh large quantities of raw materials such as candle waxes, oils, butters, etc.
  • Swivel mount, easy to read large LCD display:  1" (2.54cm) high graphics digital display, Updates at 0.4 sec intervals. Can be read up to 20’ away!
  • Simple to Operate: Push button functions for automatic and keyboard tare with multiple units conversion (lb, kg, oz, troy, etc.), memory locations, zero, and net/gross.

Specifications:

  • Dimensions: 24”x 24”x 5” High. (61cm x 61cm x 12.7cm)
  • Operating Temperature 14°F to 104°F (-10 to 40 C).
  • Unit conversions: lbs, kg, oz, troy, gram.
  • Display 1" high graphics LCD digits. Updates at 0.4 sec.
  • Excellent weight resolution and accuracy:  0.02% or 0.2 lbs, 3.2 oz (90 g) at 1000 lbs. (454 kg).
  • High gauge Stainless Steel Cover
  • Power Requirements 120 VAC, 50/60 Hz. The provided AC adapter can be used when on 120V.
  • Note: International customers on 220 V, we supply 6 - AA batteries. One set will last 6 months to a year.
  • Weight 60 lbs. (27kg).  We suggest Motor Freight although it can ship UPS.

Please Contact Us for ordering. The Tank Scale cannot be added to our shopping cart as it usually ships by Truck.

Model # Description Price
OHS Wax Melter Tank Scale $645.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

click image to enlarge

HANDcraft™ 125 Gallon Tank Scale

Our Handcraft tank scale is designed to use with our largest 125 gallon (1000 lb) wax melter tank. No more weighing bucket loads of wax or other ingredients one at a time to fill your tank.  With this nifty scale, just zero the display and pump or dump your ingredients directly into your tank. A great way to save your back while increasing your efficiency levels.

Description:

  • Very easy to Operate.
  • Maximum shock and abuse resistance is ensured with Four stainless load cells embedded in a welded frame.
  • Extra durable Heavy Duty Steel construction.
  • Select read out options in kg / lb.
  • Tare button / function.
  • Easy to read Large Digital LCD display: 1" (2.54cm) high graphics and a 60” cord.
  • Auto select Back light feature.
  • Wax, Water and oil resistant. Display has tough molded enclosure with rubber gasket.
  • The Protective display cover is removable.
  • Non-skid diamond plate surface Large Platform.
  • Weighs up to 2000 lbs. (907 kg).
  • Great accuracy with weight resolution of 0.5 lb (226.80g).
  • Has on site re-calibration feature that is easy to perform.
  • Selectable Auto shut off.
  • Does not require dealer set up or service.
  • 1-year warranty.

Specifications:

  • Scale Over-all dimensions: 39.4” x 37” (cm x cm).
  • Power Requirements: 110V, AC adapter 9V/100mA, 60Hz, or 6AA batteries (not included).
  • Weighs 155 lbs (70 Kg) - Can only be shipped motor freight.

Note: For customers with 220-volt electrical power requirements, you will require stepping the voltage down to 110 volt. We sell Step Down Transformers, just ask us. A locally purchased plug adapter may needed. You can always operate the scale with 6AA batteries (not included).

Model # Description Price
36FS2500 HANDcraft™ 125 Gallon Tank Scale $1,198.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

click on image to enlarge

Stand for Scale and Wax Melting Tanks

This heavy duty steel frame stand is designed to work with our 45, 60, and 85 Gallon Wax Melting Tanks. 

Its also designed to work in conjunction with our Tank Scale sold above.

Baked on powder coat finish for lasting durability. This Stand is tough!!

Description:

  • Feet can be anchored directly to your shop floor for maximum stability and are Height Adjustable.
  • Braced Welded steel construction for maximum support.
  • Can hold up to 1500 lbs. (680kg) in weight.
  • Built to last for many years of service with the tough powder coating finish.
  • Stand Dimensions: 24”x 24”x 36” high. (71cm x 71cm x 92cm)
  • 1.5” (4cm) additional height possible with Height adjustable legs.
  • Pad supports to use with our Tank Scale comes included.
  • Requires Minor assembly.
  • Can ship UPS

For more information, please Contact Us.

 

Model # Description Price
1000OHS Professional Stand $457.50

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

We Welcome International Orders!

Serving over 145 Countries and counting...

1800-watt-timer

1800 watt Heater Timer

Make time work for you with our Willow Way 1800 watt heater timer!  Just set the timer and walk away, your Wax Melter or drum heater will turn on automatically at the time you want. A super way to have your waxes or other ingredients ready at the start of your work day.

This 1800 watt Heater Timer is recommended for the following 110/120 volt wax melter tanks:

 

Description:

  • Can use 3 separate programming options: Same settings Monday through Friday, Same settings Saturday and Sunday, Same settings for all 7 days of the week.
  • A total of 7 ON / 7 OFF settings per week. 1 ON / 1 OFF settings per day.
  • Two Tined, Grounded Outlets.
  • Includes protective cover for moisture and dust.

Specifications:

  • 120 Volts, 60 Hz, with 24 inch cord.
  • 15 Amps, can handle up to 1800 watts.
  • Your timers programing is maintained during power failures with One replaceable AA battery (included). Can keep time up to 3 months.
  • Adjusts automatically for Daylight Savings Time.
  • Easy hand-held programming.
  • 1 year manufacturer warranty
Model # Description Price
AC1179 HANDcraft™ Heater Timer 1800 watt $80.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

7200-watt-timer

Heater Timer 7200 watt

Have your waxes or other ingredients melted and waiting for you simply by setting your 7200 Watt heater timer.  Why not make time work for you while saving energy? A win win. 

Our 7200 watt Timer can be used with the following 220/240 volt Wax Melter Tank models:

Description:

  • Save energy! There's no need to keep the heater of your Wax Melter Tank on all night.
  • Save Time! Have your candle waxes or ingredients melted and ready for the start of your work day.
  • Extremely easy to you and Very Dependable.
  • Contains battery back up: AA battery protects against programming loss.
  • Can be programmed daily with up to 6 set points, 6 ON / 6 OFF.
  • Scheduling for 5-day work week, weekend scheduling or even individual day schedules.
  • Anytime Manual override.
  • LED load indicator.
  • Includes lockable cover that protects against moisture and dust.

Specifications:

  • 120 thru 277 volt input
  • Double pole switching
  • 30 Amps/pole
  • Steel enclosure, lockable cover.
  • 3 year user replaceable battery back up
Model # Description Price
AC1177 HANDcraft™ Heater Timer 7200 watt $165.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

We Welcome International Orders!

Serving over 145 Countries and counting...

click to enlarge

Thermostat Hood

Spills happen sometimes even to the best of us. 🙂 No Problem! We've Got You Covered!

This thermostat hood is an excellent investment!

Protect your Thermostat from that occasional wax spill or splash.

Model # Description Price
THood Thermostat Hood $16.50

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Stainless Steel Work Table

Our Stainless Steel Work Table makes the perfect easy to clean work surface. Also the ideal stand for our little 6 Gallon Wax Melter Tank

  • No tools are required to easily set up this Work Table.
  • Dimensions: 49"L x 24"W x 35"H (124cmL x 61cmW x 90cmH)
  • Includes chrome plated steel shelf that is adjustable and sturdy.
  • Can adjust Shelf in 1” (2.54cm) increments.
  • Stainless Steel Work table is heavy duty, easy to clean and effortless to maintain.
  • For added safety, the edges are curved.
  • 1.5"(3.8cm) diameter chrome plated poles come with leveling feet.
Model # Description Price
AC1123 Stainless Steel Work Table $249.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Replacement Heater/Thermostats for Wax Melting Tanks

Model # Description Price
30KOH Replacement 220 volt / 3000 watt heater / thermostat $214.80
15KOH Replacement 110 volt / 1500 watt heater / thermostat $214.80
50KOH Replacement 220 volt / 4500 watt heater / thermostat $214.80

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

Willow Way Professional Easy Fill Bottler

  • Dispense anything from thin essential oils to thick wax based salves and balms with the Willow Way Filling Machine.
  • Operates Manually or Semi-Automatic.
  • Depending on your product, there are interchangeable cylinders that range in size from 3/8" in. to 2 in. (10mm to 50mm) in diameter. Therefore we customize each filling machine to order meeting your exact needs. Fill volume ranges from .06 to 8.7 fluid ounces (1.7 ml to 257ml) in a single stroke. We work with you and your specific application to determine the optimum cylinder size (or sizes).
  • Through years of experience, we've found that for most customers the ideal cylinder size is the 2" (50mm). This size fills containers from 2 oz. to 8.7 oz (60ml to 257ml) with an accuracy between  1/2% to 1%.  It is possible to fill as low as 1 oz. (30ml) with the 2" (50mm) cylinder, with an accuracy of 2% to 3%.
  • Its merely a matter of doing more fill cycles for larger containers such as quart or liter size. For example: To fill a container 250 milliliter in size, you set the fill amount to 125ml and cycle twice. Or to fill a 16 ounce container, just set the fill amount to 8 ounces and cycle twice.
  • Fill your product into bottles or jars at estimated speeds of 5 to 20 cpm (containers per minute) with the Easy Fill Bottler.
    • Actual filling speed is determined by piston stroke length, the type of product you are dispensing, viscosity of your product,   ID (inside diameter) of the discharge port of the nozzle and how your product reacts when hitting the bottom of your specific container.
    • When 1st starting out, you should expect production fill rates of about 10 bottles per minute (600 per hour). With experience this can reach over 25 bottles per minute (1500 per hour).
  • For most products, low suds soap and warm water can clean your Easy Fill Bottler. Some oils or liquids may require cycling a little alcohol and water through for cleaning.
  • Pneumatically operated. You can power the Bottler with a small inexpensive Air Compressor. (not included). Most hardware stores carry air compressors. It will require 80 to 90 psi (pounds per square inch) of air and about 3.5 cfm (cubic feet per minute).
Easy Fill Bottler
$8,680.00

This item requires customization
and therefore cannot be
added to our cart.
Model 2EFILL

Willow Way Easy Fill Bottler

Perfect for bottling many products in the personal care, cosmetic, and food industries.

Each order is customized to your needs where we determine the different valve housing and closures based on the viscosity of your product.  You receive accurate depositing and filling with a large range of products from the thinnest essential oils to thick wax based salves and balms. 

Contact us for additional information.

All prices are USD.

Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

⇒ ⇒ ⇒ We Welcome International Orders! Serving over 145 Countries and counting  ⇐ ⇐ ⇐

  • Approximate Weight: 75 LB
  • Base dimension: 19.5" by 9.5"
  • A stainless steel 5 gallon hopper is included.
  • Includes two types of machine cycle start mechanisms: A single cycle foot pedal control and an auto cycle mode.
  • Stainless Steel is used in the construction of the machine frame.
  • All metal contact parts are made of stainless steel, the valve spool and piston are made of Ertalyte. All  "O"Rings and Gaskets will be made of Viton to withstand many solvent bases, essential oils, petroleum products, fragrance oils, or vegetable oils.
  • The Easy Fill Bottler is supplied standard with a 2 inch (50mm) diameter stainless steel cylinder.
  • For easy disassembling and cleaning, all connections between the hopper and valve spool, nozzle and valve spool, and cylinder and valve spool are either quick disconnect clamps or fittings.
  • Equipped with adjustable stroke rate, control valves. The machines filling speed can be adjusted while the machine is in operation.
  • Operated by an Air Compressor (Not Included). Can be found at most hardware stores or lumber yards.
    • A minimum of 90 psi. (6.12 atm), and 1.5 cfm (43 lpm) or more is required.  Your air compressor supplier will know what you need by giving them these numbers.
    • Note: European standard is “atm & lpm” .
  • The Easy Fill Bottler is designed to cycle up to 40 x per minute.
  • Includes a How-To CD. This shows you how to properly maintain and clean your Easy Fill bottler and gives demonstrations for a variety of applications.
  • Comes with a spare parts package deemed necessary for one full year of every day operation, including piston and valve seals, quick clamp and gasket.
  • An easy to follow maintenance and parts manual.
  • Increase your Production Levels!! Saving you Time & Money.
  • Less labor! One person can easily Fill hundreds of bottles per day!
  • More Profit for You! Less labor and time saved means less cost per bottle.
  • Small Footprint - The EZ Fill Bottler weighs approximately 75 LB and is only 19.5" by 9.5" in size.
  • Manual or Semi-Automatic operation.
  • Willow Way Easy Fill Bottler is great for many applications in the cosmetic, food, and personal care industries.
  • Very Versatile - can handle anything from the thinnest Essential oils to very thick wax based salves and balms.
  • When starting out, its normal to expect production fill rates of about 10 bottles per minute (600 per hour). With experience reaching over 25 bottles per minute (1500 per hour).
  • Willow Way can supply you with additional interchangeable cylinders and piston assemblies for filling fractional ounces up to one gallon with a single machine cycle.
  • Contact us for additional information.

You can also use the Easy Fill bottler to pump ingredients directly from another vessel such as your wax melter, drum, bucket, etc.

  • All necessary attachments can be supplied to pump directly from or to another container.
  • A quote based on your application needs is required for custom fitting.
  • Usual average cost ranges between $80 to $100 USD.
    • Dependent on your application: Food grade hose 3/4" to 1" in size.
    • Quick connect from the Ball Valve and Reduction fitting.
    • Hose Barb Stainless Steel flare fitting for the inlet of the Easy Fill Bottler.
    • All clamps for necessary connections.
  • From experience, we highly recommend you place the supply container above the Easy Fill Bottler to gravity to feed your product. The Easy Fill can pull liquids from below level, however, it can possibly pull air into the system that could affect the fill accuracy.
  • Very thick products such as heavy salves will not work well using this application.

click on image to enlarge

...

Options for Easy Fill Bottler

Model Description Price
Drum-EF Drum to Easy Fill. All fittings and Ball Valve. Quick Connect 1" Hose Assembly $114.69
Tank-EF Tank to Easy Fill Quick Connect 1" Hose Assembly $111.35
Bucket-EF Bucket to Easy Fill Quick Connect 1" Hose Assembly $63.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

...

Replacement Parts for Easy Fill Bottler

Model # Description Price
EF2Ring Easy Fill, 2" Piston, O-Rings 4 each Replacement O-rings for the Easy Fill Bottler, Piston. At each end of the Piston is one ring, two total. See instructions and CD for replacement. $5.00 Pkg of 4
EF1.75Ring Easy Fill, 1.75" Spool, O-Rings Replacement O-rings for the Easy Fill Bottler, Spool. 4 each 1.75” O-Rings At each end of the Spool is one ring, two total. See instructions and CD for replacement $4.00 Pkg of 4
EFGrease Easy Fill, Food-Grade Grease, 14 oz. (398g) Food-Grade Grease for lubrication of the Piston, Spool and various parts of the Easy Fill Bottler. This is very high quality, food grade grease. Ideal for the Easy Fill Bottler 14 ounce (398 gram) tube. $16.45 ea

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

...

⇒ ⇒ ⇒ Serving over 145 Countries and counting - We Welcome International Orders ⇐ ⇐ ⇐

...

Bucket or Pail Heater

100 Watt Bucket - Pail Heater

A most reliable Pail or Bucket Heater for melting waxes that can be left on continuously. This 100 Watt Bucket Heater is designed with more robust wiring and lowered wattage for efficient continuous duty usage 24/7.

Description:

  • Ideal for both metal or plastic buckets and pails due to the low 100 Watts.
  • Easy to attach and detach making it simple to move from bucket to bucket. 
  • Adjustable thermostat for perfect temperature control.

Specifications:

  • Adjustable Thermostat range:  110 - 140 F (43 – 60 C).
  • Will not overheat plastic pails or buckets.
  • snug fit for any 5 or 6 gallon bucket or pail with included Ultra-precision Bungee Cord.
  • Triple hook & eye attachment.
  • Practical working diameter of pail: 9.5” to 12” (24cm to 30cm).
  • Excellent surface coverage and heat dispersal: Wide 3” (76mm) Silicone Belt.
  • 100 watts | 120 volt AC | 72 inch (183cm) cord.

 

Model# Description Price
AC1178a 100 Watt Bucket Heater $179.00 each

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

...

bucket-heater

200 Watt Pail & Bucket Heater

This 200 Watt Bucket/Pail Heater is suited for both plastic or metal buckets.  Adjustable thermostat gives precise temperature control. Easy to attach and detach from buckets or pails. To increase your efficiency, our Heater Timer does the job, then you can have your waxes melted when you are ready to begin your work day.

  • Adjustable Thermostat Range:  100F - 140 F (38 – 60 C).
  • Snug fit on any 5 or 6 gallon bucket with the included Ultra-precision Bungee Cord.
  • Triple hook & eye attachment.
  • Practical working diameter for buckets: 9.5” to 12” (24cm to 30cm).
  • Excellent surface coverage and heat dispersal: Wide 3” (76mm) Silicone Belt.
  • 200 watts | 120 volt AC | 72 inch (183cm) cord.
  • Will not cause overheating of your plastic pails or buckets.
Model # Description Price
AC1178 200 Watt Bucket Heater $159.00 each

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

...

Universal Bucket Insulation Jacket

We are always looking for ways to help drastically reduce your energy usage. You can save money by covering your pails or buckets with an insulating jacket. Your waxes will also heat faster and stay heated longer which can save you time too.

Description:

  • Universal Jacket will fit any 5 or 6 gallon metal or plastic pails and buckets.
  • High R-value: Insulating Jacket is constructed with a tough heat resistant foam core covered inside and out with a heavy foil lining inside.
  • Saves you $$$. This highly reflective material is effective in conserving heat and energy.
  • Kit comes pre-cut for your Bucket Insulation Jacket: includes top, bottom and side panel.
  • It only takes about 5 minutes to have your insulation jacket fitted and ready to go.
  • The kit includes everything you need to insulate your bucket or pail.
  • Included instructions are Simple to follow.
  • Waxes, Oils and Heat do not affect the insulation value.
  • Note: This jacket is designed to work specifically with our Willow Way Bucket Heaters and has a specific limit of 160° (71°C). Our Bucket Heaters are designed so they will not overheat damaging the integrity of the insulation.

Specifications:

  • Constructed with High R Value ¼” (7mm), Double Faced Foam Core insulation
  • Includes Heavy duty Velcro strips for attaching.
  • Can ship UPS
Model # Description Price
BucketIJ Universal Bucket Insulation Jacket $24.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

...

drum-heater

1,000 Watt -120 volt Drum Heater

If your waxes come bulk in drums, then this Drum Heater is a must have item for a more manageable viscosity before it can be pumped out.

  • 120 volt, 8.5 amps.
  • Adjustable thermostat control: up to 140 F (60 C).
  • Nominal diameter: 3" (10cm) width x 22 1/2" (57cm).
  • Cord: 6' (183cm).
  • Constructed with Tough and flexible silicone rubber. Will withstand lye or oil spills and splashes.
  • Safe to use on Plastic 55 gal. (208L) drums.
  • Quick Installation with Easy operating fasteners.
  • 1,000 watts: Heats in a timely and efficient manner while preventing damage to your ingredients.
  • For more efficiency, consider placing  a Heater Timer on your Drum Heater.  Have your waxes melted ready to pour when you need them.
  • Do you have special requirements? We can customize for any application you may have, just contact us.
  • If you require more temperature control, just ask, we can custom build to your specifications.
  • Note: When heating in a plastic drum, Wrap an 8" section of aluminum flashing around drum and under band heater.
Model # Description Price
AC1175 1000 Watt Drum Heater (120 volt) $196.00 each

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

...

drum-heater

1,200 Watt -220 volt Drum Heater

A drum heater is a must have item to warm your waxes to a manageable viscosity so you can pump them out of your drum.

  • 220 volts, 5.5 amps
  • Adjustable thermostat control:  50F to 425 F (10 - 218 C).
  • Tough and flexible silicone rubber construction withstands lye and oil spills.
  • Nominal diameter: 4" (13cm) width x 22 1/2" (57cm).
  • Cord: 6' (183cm)
  • Safe enough for use on Plastic 55 gal. (208L) drums. Note: When using on a plastic drum, do not turn the thermostat up past the temperature required to melt your waxes. We recommend wrapping an 8" section of aluminum flashing around drum and under band heater. 
  • Quick installation with Easy operating fasteners.
  • 1,200 watts to efficiently warm your waxes in a timely manner while preventing damage.
  • Tip: For even more efficiency, use our  Heater Timer so your wax is melted and ready at the start of your work day with our. Just set the timer to turn on your drum heater.
  • Note: We cannot match all plug styles with the numerous 220 volt plug configurations. Your Plug should be wired on site to meet local codes.

For special requirements or more temperature control, we can build or customize any application you may need. Just contact us.

 

Model # Description Price
AC1176 1200 Watt Drum Heater (220 volt) $239.00 each

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com

...

drum-jacket

Universal Drum Insulation Jacket

You can drastically cut your energy usage by covering your drums with an insulation jacket. It will save you money and save you time. Your waxes will heat faster and conserve heat longer.

Description:

  • Universal Drum Insulation Jacket is constructed with an extremely efficient high R-value material. Tough heat resistant foam core lined inside and out with a heavy duty, highly reflective foil. 
  • Kit for the Drum Insulation Jacket comes pre-cut: top, bottom and side panel.
  • It only takes about 1o minutes to have your drum jacket fitted and ready to use. The only tools required is a box cutter or sharp knife.
  • The kit includes 4 industrial strength Velcro strips for fastening.
  •  Instructions for installation are included.
  • Heat, wax or oil does not affect the insulation value.
  • Note: This jacket has been designed to work specifically with our Willow Way Drum Heaters. The jacket material has a temperature limit of 160° (71°C) and our Drum Heaters will not overheat damaging the integrity of the insulation jacket.

Specifications:

  • Constructed with High R ¼” (7mm) Foam Core, Double Faced reflective insulation.
  • Heavy duty Velcro strips included
  • Can ship UPS
Model # Description Price
DrumIJ Universal Drum Insulation Jacket $65.00

All prices are USD.  Adding items to cart will redirect you to our secure shopping cart at soapequipment.com